PRODUCTS
All categories

Product list display

Company Profile

Since its establishment in 1978, Sanki Seiko Co., Ltd. has always adhered to the tenet of "contributing to society with high-quality products", and with unique technology and services, our products have been sold all over the world such as Europe, North America and Asia.
In China, there are also Dongfeng Motor Corporation, Tianjin Auto Mould, Shanghai Yanfeng Weistone, Qingdao Haier Mould and other enterprises have chosen our equipment successively. Moreover, with the gratifying performance of 86% of repeat customers, it has been widely recognized by users. Here, we would like to express our sincere thanks again to our customers!
Convinced that "seeing is better than hearing a hundred things", with 30 years of professional production experience, serving 17 countries and regions in the world, and currently selling more than 500 units, Sanki Seiko Co., Ltd.'s leading function of flip-type clamping with world standards as the goal machine, and can also meet your company's market requirements in the mold manufacturing process [high quality, short delivery time].
We will always keep an eye on your company's attention to the mold clamping machine, and look forward to your inquiries.

 

 

Injection Die Casting

Flip Clamping Machine
  SDP-1007-50 SDP-1310-100 SDP-1612-150 SDP-1813-200 SDP-2015-200 SDP-2515-300 SDP-2520-200 SDP-3020-400 SDP-3525-500
Pressurizing capacity KN 500 1000 1500 2000 2000 2000 2000 3000 2000 3000 4000 5000
Lifting ability KN 170 360 420 570 420 570 570 700 630 830 900 1000
Table size mm 1000×700 1300×1000 1600×1200 1800×1300 2000×1500 2500×1500 2500×2000 3000×2000 3500×2500
Opening height mm 900 1200 1500 1600 1700 2000 2300 2500 2700
Slider stroke mm 850 1130 1500 1390 1580 1680 2000 2110 2500 2700
Injection wax test mold Injection capacity
CC
1000 1200 2800 2800 4800 5700 15000 7300 7300
ejection force
Mpa
2 2 2 2 1.8 2.2 0.5 2.4 2.4
Falling speed mm/sec 75 70 80 75 80 80 80 80 80 80
Low speed descent speed mm/sec 27 22 22 20 14 23 22 18 27 23 18 19
Ascent speed mm/sec 77 56 80 73 68 80 78 76 83 80 76
Motor power KW 5.5 7.5 11 15 15 18.5 22 30 30 37 45
Mould maximum weight 3 6 8 11 15 20 20 30 35 40
Mould maximum weight 1.5 3 4 5 7 10 10 15 20
 
SDP series standard accessories
●180 degree forward flip device (R)
The upper die can be flipped forward at any angle from 0 to 180 degrees, which can greatly improve the efficiency of die correction.
●Safety bar
When the slider is at the upper limit position, it is pushed in (automatically or manually) to ensure the safety of people entering the equipment.
●Slider locking device
When the slider is at the upper limit position, it can be automatically locked. To prevent the slider from falling under its own weight.
●Safety alarm device (when flipping, moving, falling)
When the workbench is flipping, moving, and falling, it will make various sounds to remind the operator to pay attention.
●Balance descending device
The mold clamping operation can be performed in a near-no-load state, and it exerts power in the production of plaster molds.
(SDP-1070-50 and SDP-1310-100 only have self-weight descending device)

Special accessories (option)

●Wax injection device (T)
You can directly carry out the wax injection mold test on the equipment, and quickly confirm the shape of the product and the condition of the burr.
●Ejector device (E)
It can adjust the ejector pin built in the mold, confirm its movement, and take out the wax injection trial product.
●Hydraulic source for core pulling (side pulling)
Each action can be checked for the cylinder built in the mold.
●Light protection device
It is installed on the front and rear sides of the mold clamping machine to prevent accidents caused by operating errors or carelessness.
●Digital display position control device (D)
The slider position is detected by the rotary encoder and can be displayed digitally.
●Color touch screen
Pre-set points and digital display can be performed on the action requirements of the equipment.


Stamping Abrasives

 

DPM series standard specifications
  DPM-1612-10 DPM-2015-20 DPM-2515-30 DPM-3020-50 DPM-4025-100
Pressurizing capacity KN 100 200 300 300 500 500 1000 1000 2000
Lifting ability KN 60 130 200 300 500
Table size mm 1600×1200 2000×1500 2500×1500 3000×2000 4000×2500
Opening height mm 1300 1800 2000 2200 2500
Slider stroke mm 900 1300 1600 1700 1800
Falling speed mm/sec 50 50 80 80 90
Low speed descent speed mm/sec 10 10 15 11 14
Ascent speed mm/sec 70 70 80 80 80
Motor power KW 5.5 7.5 7.5 11 15 22 22 37 37
Mould maximum weight ton 3 8 10 20 30
Upper die maximum weight ton 1.5 4 5 10 15
DPM series standard accessories
●Safety bar
When the slider is at the upper limit position, it is pushed in (automatically or manually) to ensure the safety of people entering the equipment.
●Slider locking device
When the slider is at the upper limit position, it can be automatically locked. To prevent the slider from falling under its own weight.
Special accessories (option)
●Fine adjustment device (A)
The precision requirement of the lower limit accuracy of the slider of 0.05mm, which cannot be achieved by hydraulic control, is mechanically achieved, thereby reproducing the high-precision mold clamping of the equipment. It plays a great role in the tool setting operation of punching dies, blanking dies and trimming dies.
●180 degree forward flip device (R)
The upper die can be flipped forward at any angle of 0-180, which can greatly improve the efficiency of die correction.
●Digital display position control device (D)
The slider position is detected by the rotary encoder and can be displayed digitally.
●Color touch screen
Pre-set points and digital display can be performed on the action requirements of the equipment.
●Balance descending device
The mold clamping operation can be performed in a near-no-load state, and it exerts power in the production of plaster molds.
●Light protection device
It is installed on the front and rear sides of the mold clamping machine to prevent accidents caused by operating errors or carelessness.
Trial press

 

host
pressure
machine
. STR-1612-200 STR-2015-300 STR-2515-400 STR-3020-500 STR-3520-800 STR-3522-1000
Pressurizing capacity KN 2000 3000 4000 5000 8000 10000
Lifting ability KN 200 350 420 500 730 1000
Table size mm 1600×1200 2000×1500 2500×1500 3000×2000 3500×2000 3500×2200
Opening height mm 1400 1600 1800 2000 2200 2200
Slider stroke mm 1100 1200 1500 1500 1700 1700
Falling speed mm/sec 150 150 150 150 150 160
Pressing speed mm/sec 18~8 15~6 18~8 16~7 15~6 18~7
Ascent speed mm/sec 150 150 150 150 150 160
mold
Tool
slow
rush
Pack
set
Output capacity KN 700 1000 1300 1500 1500 1500
stroke mm 200 250 300 350 400 400
Buffer area mm 1130×830 1460×820 1710×960 2200×1290 2250×1120 2470×1300
Ascent speedmm/sec 32 40 50 40 50 40
  Motor power KW 18.5 22 30 45 75 90
Mould maximum weight ton 6 10 12 15 20 20
Upper die maximum weight ton 3 5 6 8 10 10
STR series standard accessories (option)
●Light protection device
It is installed on the front and rear sides of the mold clamping machine to prevent accidents caused by operating errors or carelessness.
●Safety bar
When the slider is at the upper limit position, it is pushed in (automatically or manually) to ensure the safety of people entering the equipment.
●Slider locking device
When the slider is at the upper limit position, it can be automatically locked. To prevent the slider from falling under its own weight.
●Independent two-hand start operation panel
It is used for mold trial, single-cycle start during trial production, and safe production can be carried out by two-hand operation.
Special accessories (option)
●Fine adjustment device (A)
The precision requirement of the lower limit accuracy of the slider of 0.05mm, which cannot be achieved by hydraulic control, is mechanically achieved, thereby reproducing the high-precision mold clamping of the equipment. It plays a great role in the tool setting operation of punching dies, blanking dies and trimming dies.
●180 degree forward flip device (R)
The upper die can be flipped forward at any angle of 0-180, which can greatly improve the efficiency of die correction.
●Buffer device (S)
It exerts its power in the trial production of punching dies, blanking dies, and trimming dies. It can greatly reduce the impact force and noise generated during the punching operation.
●Digital display position control device (D)
The slider position is detected by the rotary encoder and can be displayed digitally.
●Color touch screen
Pre-set points and digital display can be performed on the action requirements of the equipment.
●Multiple adjustable swimming devices
Set the color touch screen to multi-screen, and the position of the buffer device can be set up to 30 points. According to this mode, 100 modes can be stored. At the same time, when the color touch screen is set to single screen, it can also return to the original equal position and output.
●Balance descending device
The mold clamping operation can be performed in a near-no-load state, and it exerts power in the production of plaster molds.
We could not find any corresponding parameters, please add them to the properties table
Next

SEO  Copyright @ www.kbkcn.com. All Right Reserved. 沪ICP备10209317号 300.cn  px